Table of Contents
Advertisement
Level 1 and 2 Service Manual
Removing and Replacing the Flip Assembly Cover
6809505A63-O
1.
Remove the battery cover, battery, USIM, memory card, rear housing, and transceiver
board assembly as described in the procedures.
2.
Remove the 4 flip assembly screw caps.
3.
Use the T-5 driver to remove the 4 screws from the flip assembly (see Figure 10). Retain
the screws for re-assembly.
Figure 10. Removing the Flip Assembly Screws
4.
Before removing the flip cover, note the locations of the smart buttons on the sides of the
flip assembly.
5.
Use the disassembly tool to gently pry off the flip cover (see Figure 11).
Disassembly Tool
Figure 11. Separating the Flip Assembly Cover
September 26, 2006
Screws
Screws
Flip Assembly Cover
Disassembly
061431o
040722o
23
Advertisement
Table of Contents
