Motorola IDEN I580 Field Service Manual page 7

Basic and field level test procedures digital multi-service, data-capable portable
Hide thumbs Also See for IDEN I580:
Table of Contents

Advertisement

SAFETY AND GENERAL INFORMATION
Use of a non-recommended attachment to a battery charger
may result in a risk of fire, electric shock, or injury to
persons.
Make sure the battery charger power cord is located so that
it will not be stepped on, tripped over, or subjected to
damage or stress.
An extension cord should not be used with any battery
charger unless absolutely necessary. Use of an improper
extension cord could result in a risk of fire and electric
shock. If an extension cord must be used, make sure that:
The pins on the plug of the extension cord are the same
number, size, and shape as those on the plug of the
charger.
The extension cord is properly wired and in good
electrical condition.
The cord size is 18AWG for lengths up to 100 feet and
16AWG for lengths up to 150 feet.
vi
Do not operate any battery charger if it has received a sharp
blow, has been dropped, or has been damaged in any way;
take it to a qualified service technician.
Do not disassemble a battery charger; take it to a qualified
service technician when service or repair is required.
Incorrect reassembly may result in a risk of electric shock or
fire.
Maximum ambient temperature around the power supply or
transformer of any battery charger should not exceed 40°C
(104°F).
The output power from the power supply or transformer
must not exceed the rating given on the Desktop Dual-
Pocket Charger.
The disconnection from the line voltage is made by
unplugging the power supply from the AC receptacle.
To reduce risk of electric shock, unplug any battery charger
from the outlet before attempting any maintenance or
cleaning.
For optimum charging performance, turn off the radio product
while charging it in any battery charger.
68P80401P05

Advertisement

Table of Contents
loading

Table of Contents