Removing And Replacing The Flip Assembly - Motorola V975 Service Manual

Disassembly

Removing and Replacing the Flip Assembly

G
30
1. Remove the battery cover, battery, SIM, antenna, rear housing, transceiver
board assembly, and keypad assembly as described in the procedures.
2. Carefully flex the front housing downward to release the hinge assembly from
the front housing (see Figure 15).
Figure 15. Removing the Flip Assembly
3. Carefully slide the display flex cable and connector through the housing
assembly. Avoid damage to the flex cable.
The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when
handling.
4. Lift the housing assembly away from the flip assembly. Be careful not to
damage the display flex cable.
November 12, 2004
V975/V980 GSM
Flip Assembly
Hinge
Assembly
Front
Housing
Display Flex Connector
6809490A74-O
040955o