Motorola IDEN I580 Field Service Manual page 72

Basic and field level test procedures digital multi-service, data-capable portable

Hide thumbs Also See for IDEN I580:

Table of Contents

6. Align the flip to the front housing to resemble closed flip. Using the black stick, push the Hinge

Assembly Mechanism inward into the right knuckle of the front housing.

7. Once set, check the hinge position by opening and closing the flip looking for binding or other

unusual action. Flip should open smoothly, stay open, and close completely.

8. Align frame-flip center hinge within the slot between the left and right knuckle of the flip.

9. Insert the three T4 screw. Tighten clockwise to 0.5 in/lb.

68P80401P05

PREPARING FOR FIELD LEVEL TESTING: Install Flip Assembly

Figure 7-11.

Table of Contents