Remove Flip Assembly; 7.14.1 Procedure To Remove Flip Assembly - Motorola IDEN I580 Field Service Manual

Basic and field level test procedures digital multi-service, data-capable portable

Hide thumbs Also See for IDEN I580:

Table of Contents

PREPARING FOR FIELD LEVEL TESTING: Remove Flip Assembly

7.14

Remove Flip Assembly

Tools: Black stick. NO metallic tools!

NOTE: i580 flip components include a Flex Connector ribbon which can be easily torn or

damaged if not handled properly. Handle the Flex Ribbon with care especially when

working it through the front housing slot.

1. Remove the keypad and main board from the front housing. Make sure the flip is in the open

position.

2. Remove the three T-4 screws securing the frame-flip center hinge. Flip the unit over and lift the

flip-center hinge straight up to remove.

3. Locate the slight gap between the right knuckle and flip assembly. Align the flat tip of the black

stick with the gap.

Figure 7-8.

68P80401P05

Table of Contents