Removing And Replacing The Flip Assembly Cover - Motorola V3 Service Manual
Digital wireless telephone
Hide thumbs
Also See for V3:
- Owner's manual (254 pages) ,
- Motomanual (214 pages) ,
- User manual (204 pages)
Table of Contents
Advertisement
Level 1 and 2 Service Manual
Removing and Replacing the Flip Assembly Cover
6809485A72-O
1.
Remove the battery cover, battery, SIM, antenna, rear housing, and
transceiver board assembly as described in the procedures.
2.
Remove the 4 flip assembly screw caps.
3.
Use the T-5 driver to remove the 4 screws from the flip assembly (see Figure
10). Retain the screws for re-assembly.
Figure 10. Removing the Flip Assembly Screws
4.
Before removing the flip cover, note the locations of the smart buttons on the
sides of the flip assembly.
Screws
Screws
July 30, 2004
Disassembly
031838o
29
Advertisement
Table of Contents
Troubleshooting
