Displays, Messages, And Alerts; Power-Up Sequence - Motorola IDEN I580 Field Service Manual

Basic and field level test procedures digital multi-service, data-capable portable

Hide thumbs Also See for IDEN I580:

Table of Contents

CHAPTER 3

DISPLAYS, MESSAGES, AND ALERTS

To conduct basic troubleshooting and maintenance of the i580 unit, you must become familiar with

the display screens, messages, and alert tones associated with the unit.

3.1

Extend the antenna whip and press the Power key until the power-up sequence begins. The power-

up sequence initiates a series of displays on the unit. Each display reflects a stage in the sequence.

If the last display shows the idle screen, the power up was successful; if the last display shows No

Service, the unit is out of range or there is a hardware or software problem. If the vibrate function is

enabled for incoming phone calls, voice mail, or message mail, the power-up sequence includes a

500ms vibrate cycle.

Depending upon the service provider, the power-up sequence screens may differ from those shown.

68P80401P05

1. Powering On

2. Insert SIM

3. Enter SIM

Note: SIM PIN feature can be

cancelled.

Figure 3-1. Power-Up Sequence Displays

DISPLAYS, MESSAGES, AND ALERTS: Power-Up Sequence

4. Connecting

5. No Service

6. Unit Ready Display (Idle

Note: Idle screens differ depending

Table of Contents