8.13 Model Assembly (Ma) Test Mode Test - Motorola IDEN I580 Field Service Manual

Basic and field level test procedures digital multi-service, data-capable portable

Hide thumbs Also See for IDEN I580:

Table of Contents

FIELD LEVEL TEST MODES AND PROCEDURES: Model Assembly (MA) Test Mode Test

8.13 Model Assembly (MA) Test Mode Test

•

Model Assembly Test Mode is an embedded series of operational tests of the unit's user

interface and functional features.

•

Motorola iDEN recommends MA Test Mode be performed after any servicing of the unit.

•

An audio test cable is required to complete MA Test Mode effectively. See the Required Tools

section or contact Motorola's Aftermarket Accessories Division (AAD).

MA Test mode is achieved by starting from a power-down condition:

1. Press and hold three number keys simultaneously with the Power key, such as 1-2-3, 4-5-6,

7-8-9.

2. Release once the opening screen appears in the main display.

3. Follow instructions as they appear pressing the indicated keys.

4. No instruction? Press any key or Scroll right.

5. No reaction? Power down the unit and start MA Test again.

•

Main LCD and CID displays depicted as follows. Note that opening displays may vary

depending on carrier preference.

68P80401P05

Table of Contents