Table of Contents
Advertisement
COM Express Board
Super IO Device
Move the cursor to this field and press <Enter>. The following
screen will appear.
↑↓→←
The settings on the screen are for reference only. Your version may not be
identical to this one.
Power On Function
This field allows you to use the PS/2 keyboard or PS/2 mouse to
power-on the system.
Keyboard 98 When this option is selected, press the "wake up"
Button only
Hot Key
Mouse Left
Mouse Right When this option is selected, double-click the right
Any Key
54
Phoenix - AwardBIOS CMOS Setup Utility
Power On Function
Hot Key Power ON
Onboard FDC Controller
PWRON After PWR-Fail
Onboard Serial Port 1
Serial Port 1 Use IRQ
Serial Port 1 Mode
Onboard Serial Port 2
Serial Port 2 Use IRQ
Onboard Serial Port 3
Serial Port 3 Use IRQ
Onboard Serial Port 4
Serial Port 4 Use IRQ
: Move
Enter: Select
F5: Previous Values
key of the Windows
power-on the system.
Default setting. Uses the power button to power
on the system.
When this option is selected, select the function
key you would like to use to power-on the system
in the "Hot Key Power On" field.
When this option is selected, double-click the left
button of the mouse to power-on the system.
button of the mouse to power-on the system.
Press any key to power-on the system.
Super IO Device
BUTTON ONLY
Ctrl-F1
Enabled
Off
3F8
IRQ4
Normal
2F8
IRQ3
3E8
IRQ10
2E8
IRQ11
+/-/PU/PD: Value
F10: Save
F6: Fail-Safe Defaults
®
98 compatible keyboard to
Item Help
Menu Level
ESC: Exit
F1: General Help
F7: Optimized Defaults
Advertisement
Table of Contents
