Super Io Device; Kbc Input Clock; Power On Function - DFI LT600-DR/D/L User Manual

Super IO Device

Move the cursor to this field and press <Enter>. The following
screen will appear.

KBC Input Clock

Power On Function

KB Power On Password
Hot Key Power ON
Onboard FDC Controller
Onboard Serial Port 1
Onboard Serial Port 2
UART Mode Select
x RxD, TxD Active
x IR Transmission Delay
x UR2 Duplex Mode
x Use IR Pins
Onboard Parallel Port
Parallel Port Mode
x EPP Mode Select
x ECP Mode Use DMA
PWRON After PWR-Fail
↑↓→←
: Move Enter: Select
F5: Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.
KBC Input Clock
This is used to select the input clock of your keyboard.
Power On Function
This field allows you to use the PS/2 keyboard or PS/2 mouse to
power-on the system.
Button only
Password
Hot Key
Mouse Left
Mouse Right When this option is selected, double-click the right
Any Key
Phoenix - AwardBIOS CMOS Setup Utility
Super IO Device
8 MHz
BUTTON ONLY
Enter
Ctrl-F1
Enabled
3F8/IRQ4
2F8/IRQ3
Normal
Hi, Lo
Enabled
Half
IR-Rx2Tx2
378/IRQ7
SPP
EPP1.7
3
Off
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Default setting. Uses the power button to power
on the system.
When this option is selected, set the password you
would like to use to power-on the system in the
"KB Power On Password" field.
When this option is selected, select the function key
you would like to use to power-on the system in
the "Hot Key Power On" field.
When this option is selected, double-click the left
button of the mouse to power-on the system.
button of the mouse to power-on the system.
Press any key to power-on the system.
BIOS Setup
Item Help
Menu Level
F10: Save ESC: Exit F1: General Help
F7: Optimized Defaults
3
7 9