Table of Contents
Advertisement
3
BIOS Setup
Super IO Device
Move the cursor to this field and press <Enter>. The following
screen will appear.
x KB Power On Password
x Hot Key Power ON
x RxD, TxD Active
x IR Transmission Delay
x UR2 Duplex Mode
x EPP Mode Select
x ECP Mode Use DMA
↑↓→←
F5: Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.
KBC Input Clock
This is used to select the input clock of your keyboard. The options
are: 8MHz and 12MHz. The default is 8MHz.
Power On Function
This field allows you to use the PS/2 keyboard or PS/2 mouse to
power-on the system.
Keyboard 98 When this option is selected, press the "wake up"
Password
Button only
Hot Key
76
Phoenix - AwardBIOS CMOS Setup Utility
KBC Input Clock
Power On Function
Onboard FDC Controller
Onboard Serial Port 1
Onboard Serial Port 2
UART Mode Select
Onboard Parallel Port
Parallel Port Mode
: Move
Enter: Select
key of the Windows
power-on the system.
When this option is selected, set the password
you would like to use to power-on the system in
the "KB Power On Password" field.
Default setting. Uses the power button to power
on the system.
When this option is selected, select the function
key you would like to use to power-on the system
in the "Hot Key Power On" field.
Super IO Device
12 MHz
BUTTON ONLY
Enter
Ctrl-F1
Enabled
3F8/IRQ4
2F8/IRQ3
Normal
Hi, Lo
Enabled
Half
378/IRQ7
SPP
EPP1.7
3
+/-/PU/PD: Value
F10: Save
F6: Fail-Safe Defaults
®
98 compatible keyboard to
Item Help
Menu Level
ESC: Exit
F1: General Help
F7: Optimized Defaults
Advertisement
Table of Contents
