Connecting One Expansion Box; Expansion Box And Accessories - DEC MicroVAX 3100 Owner's Manual

Figure 4-3: Expansion Box and Accessories
50-Pin to 50-Pin - - - - - i : - - - -
Connector Cable
Terminator
- - - - + - - - - - - -
Power Cord - - - - - : - - - - - - - - - - - - - -
4.4 Connecting One Expansion Box
MLO-002749
To connect a single expansion box to your system unit, perform the following
steps:
1. Set the on/off switches on the system unit and expansion box to the off
(0) position.
2. Turn the expansion box so that the back is facing you.
3. Verify the SCSI ID switch positions.
Each device is shipped from the factory with the default switch positions
shown in Table 4-1. Read the switch positions from left to right. See
Figures 4-9, 4-11, and 4-13.
Expanding Your System
4-5