Modifying Fis For A System In A Larger Cluster; Installing Operating System Software - DEC MicroVAX 3100 Owner's Manual

$ @SYS$UPDATE:VMSLICENSE
I
Return
I
NOTE:
Care should be taken to ensure that the information (as read from
the PAK) is entered correctly.
If you make a mistake while entering any PAK, continue the data entry
sequence and reject the entered data at the end of the sequence when the
system asks you to confirm that the data entered is correct. The system
then gives you the opportunity to reenter the data correctly.
NOTE:
Care should be taken when reentering data to ensure that the PAK
data is entered correctly.
See the VMS License Management Utility Manual for any additional
information you may need.
Appendix G and Appendix H provide information on backing up the system
disk and tailoring VMS files respectively. Read this information carefully
and decide the exact sequence of backup and tailoring functions necessary,
based on the amount of tailoring required (if any) and the backup resources
available to you.
See the VMS Installation and Operations Manual for further information
on entering Program Authorization Keys (PAKs) , customizing and testing
the system, startup and shutdown, and backup procedures.
2.7.3 Modifying FIS for a System in a Larger Cluster
If you intend to configure your system in a larger cluster, see the VMS
VAXcluster Manual supplied with your software documentation for detailed
information.
2.8 Installing Operating System Software
If you need to install your operating system or if you are upgrading your
operating system, you will need to have one of the following:
• TZ30 tape drive
• Connection to a network to load the software from another system
• RRD40 compact disc expansion box
• TK50Z tape drive expansion box
To set your system up to automatically start operating system software
from a particular device, see Appendix A.
2-22
MicroVAX 3100 and VAXserver 3100 Owner's Manual