Connecting the Workstation
Attach the Ethernet loopback connector to the AUI Ethernet
Step 1: Attach
port on the system unit, as shown in Figure 3–2. If you plan to
the Ethernet
Loopback
connect to an AUI Ethernet network or a ThinWire Ethernet
Connector
network using a DECXM transceiver, you may omit this step.
After you have completed the connections in this chapter, see
Chapter 5 for information about network connections.
Figure 3–2 Attaching the Ethernet Loopback Connector
IS D N
S3
4
1
0
Connecting the Workstation
MLO-010856
Installing a Workstation System 3–5