Connecting The System Power Cord To System - DEC 3000 800 Owner's Manual

Connecting the Workstation
Connect the system power cord to the workstation system unit,
Step 7:
Connect the as shown in Figure 3–8. The system power cord is the thicker of
the two power cords shipped with your system, and is specially
System Power
keyed to fit in the system power socket.
Cord
Figure 3–8 Connecting the System Power Cord to System
Make sure that the power On/Off switch is in the Off (O)
Step 8: Plug
position, and then plug the other end of the power cord into an
Cord into
Power Outlet appropriate outlet.
3–14 Installing a Workstation System
3
2
IS D N
S3
4
1
5
0
MLO-010858