Turn The Power On/Off - NAC Image Technology Memrecam Q1v User Manual

Turn the Power ON/OFF

Turn the power on to start up the MEMRECAM Q1m/Q1v.
■ Start up the Q1m/Q1v
(00375)
１
Turn ON the power switch of the AC adapter
 Turn the switch ON after verifying the cable is
connected to the AC adapter and camera.
2
Confirm the status with the camera LED
 If the power switch on the AC adapter is turned
ON, the camera starts up and automatic diagnosis
starts.
 MODE：Blue
STATUS：Green
Upon reaching this status, the camera starts up
normally.
3
Execute the operations using the control software.
2-11

Turn the Power ON/OFF