NAC Image Technology Memrecam Q1v User Manual page 35

■ Connect the Q-CAM Cable
Connect the Q-CAM cable sold separately.
 Make sure to install the locking clip when using in vibrating environments.
 The Q-CAM cable is a dedicated cable for Q1m/Q1v. Do not use with the MEMRECAM GX or HX
series.
(00375)
１
Connect the Q-CAM cable to the camera
 Line up the red arrow of the Q-CAM cable plug with the IF
connector on the camera and plug in until it clicks.
２
Install the locking clip
 Mount the locking clip to prevent removal of the cable.
2-7
Connect the Equipment and Cables