NAC Image Technology Memrecam Q1v User Manual page 10

Safety Precautions
Using the main camera unit
● Do not disassemble or alter
(Do not loosen screws on the main camera unit or open the cover even if the camera
malfunctions.)
⇒ Contact the store where purchased for inspection ・maintenance ・repair.
● Do not use in locations with smoke or flammable or corrosive gases, or strong magnetic fields
(Malfunction, injury or fire may occur.)
⇒ Do not use in dirty, dusty or humid locations.
● If there is a malfunction, unplug the cables connected to the camera and the power plug for
the AC adapter
(If water or other foreign objects get inside, if the exterior breaks due to being dropped, if
the camera becomes hotter than normal, or if smoke, odors or noises are emitted. The camera
becomes warmer during operation so this is not a malfunction.)
⇒ Contact the store where purchased or our service center.
Using the cables
● Do not unplug the cable with the power on.
● Do not put foreign articles such as metal, trash or water inside the connector.
(Malfunction or electrical shock may occur if the cable is connected or removed with the power
on.)
⇒ Unplug the cable only after turning off the power.
● Do not touch the plug or connector with wet hands.
(Malfunction, electrical shock or fire may occur.)
Confirm the input power
● Check the input power before connecting.
 During AC adapter use：AC100～240V/47～63Hz
 During DC power connection：DC20～32V
(Malfunction, electrical shock or fire may occur if connected to the wrong power supply.)
8
(00375)