NAC Image Technology Memrecam Q1v User Manual page 13

Using the AC Adapter
● Use environment
 Avoid using in locations with smoke or corrosive gases, or strong magnetic fields
 Do not leave in direct sunlight or locations subject to rain or salt water.
 Do not use in dirty, dusty or humid locations.
● Check the input power
(The AC adapter is AC100～240V, 47～63Hz so check the power voltage, frequency and polarity
before connecting to a power source.)
● Check the ambient temperature of the location where used and the location where stored
 Temperature range for use：0～70℃, humidity 5～95%RH, no condensation
 Temperature range for storage：-40～85℃,humidity 5～95%RH, no condensation
● Make sure unit is grounded
(Ground with an AC3 pin connector. If not grounded, electrical shock may occur upon contact
with the camera.)
Handling when moving or transporting the AC adapter
● Turn off the power and unplug the connected cables
(Make sure the power is turned off and the cables unplugged when moving the AC adapter. Fire,
electrical shock or malfunction may be caused.)
In addition to that mentioned above, unexpected problems may occur depending on the conditions of use of
this device. Therefore, carefully read the various items mentioned in this manual as well as in the user's guide
for peripheral devices (or user's manual) before using. Additionally, immediately contact the store if there
are any questions regarding this device.
(00375)
11
Safety Precautions