Table of Contents
Advertisement
Available languages
Available languages
16
3.13 EDIT CUSTOM
• Press the MENU button, select the [Edit] menu voice and press the ENTER button to confirm the choice.
• Edit the custom programs by adjusting the value of [Step], [Pan], [Tilt], [Speed], [Color], [Gobo1], [Gobo1 Rot],
[Dimmer], [Strobe] and [Time].
• Press the ENTER button to confirm.
• Enter [Use] and select [Yes] to run the steps user need.
CROMOBEAM250 will execute all the steps in the custom program and it will stop. To make the fixture to
start over add a last step whose duration is 0 second.
Example
Step1:
Step2:
Step3:
Step4:
Step5:
...
Step255:
NOTE. CROMOBEAM250 will execute all the steps in the custom program in the stand-alone operation
mode.
• Go to MENU > [Intro] . Enter [Run] to select the operation mode: [Custom].
3.14 FIXTURE SETTINGS
It is possible to change the parameter value in the following way:
Invert function
• Press the MENU button, select the [Invert] menu voice and press the ENTER button to confirm the choice.
• Select the parameter to be changed between [Pan], [Tilt] and [Color] and press the ENTER button to con-
firm.
• Set the desired parameter value using the UP and DOWN buttons and press the ENTER button to confirm
the setting.
• Press the MENU button to go back or wait 30 seconds for automatic exit from the menu.
Used
Pan
movement
Used
Tilt
movement
Color movement mode
Color
• Enter [Use] and set [Yes] to run the new setting.
CROMOBEAM250
Time=5
Use= Yes
Time=4
Use= Yes
Time=6
Use= Yes
Time=0
Use= Yes
Time=0
Use= No
...
...
Time=0
Use= No
for
reversing
Pan
for
reversing
Tilt
This step creates a loop
Unused steps
To disable
Normal
To enable
Reverse
To disable
Normal
To enable
Reverse
Step mode
Step
Linear mode
Linear
Advertisement
Chapters
Table of Contents
