Fixture Settings - ProLights CROMOSPOT250 User Manual

3.14 FIXTURE SETTINGS

It is possible to change the parameter value in the following way:
Invert function
• Press the MENU button, select the [Invert] menu voice and press the ENTER button to confirm the choice.
• Select the parameter to be changed between [Pan], [Tilt] and [Color] and press the ENTER button to con-
firm.
• Set the desired parameter value using the UP and DOWN buttons and press the ENTER button to confirm
the setting.
• Press the MENU button to go back or wait 30 seconds for automatic exit from the menu.
Used
Pan
movement
Used
Tilt
movement
Color movement mode
Color
• Enter [Use] and set [Yes] to run the new setting.
Range function
• Press the MENU button, select the [Range] menu voice and press the ENTER button to confirm the choice.
• Select the parameter to be changed between [P/start], [P/finish], [T/start] and [T/finish]; press the ENTER
button to confirm.
• Set the desired parameter value (0-255) using the UP and DOWN buttons and press the ENTER button
to confirm the setting.
• Press the MENU button to go back or wait 30 seconds for automatic exit from the menu.
P/start Starting point for the limited Pan
P/finish Finishing point for the limited Pan
Starting point for the limited Tilt
T/start
Finishing point for the limited Tilt
T/finish
• Enter [Use] and set [Yes] to run the new setting.
CROMOSPOT250
for reversing Pan
for reversing Tilt
To disable
Normal
To enable
Reverse
To disable
Normal
To enable
Reverse
Step mode
Step
Linear mode
Linear
000-255
000-255
000-255
000-255
17