Fixture Settings; Information - ProLights BB5PIX User Manual

3.14 FIXTURE SETTINGS

It is possible to change the parameter value in the following way:
Setting projector functions
• Press the button MENU, set the desired parameter using UP/DOWN and press the button ENTER to
confirm the setting.
DIMMER
Enter [DIMMER MODE] to select dimmer mode and dimmer speed. When dimmer is set to [OFF], the RGB
and MASTER DIMMER are linear. The Dim1/2/3 are speed modes of the non linear dimmer, [dim1] is the
faster, while [dim3] is the slowest.
Note. The factory default setting is [dim3].
LED
Enter [Led] function to select the display backlight. You can You can select the desired setting from [on]
[10S], [20S] and [30S].

3.15 INFORMATION

Fixture information
• Press the button MENU, set the desired parameter using UP/DOWN and press the button ENTER to
confirm the setting.
- [test] - test device. In [test] the unit will run self-test.
- [Fhrs] - Through the [Fhrs] function you can display the running time of the projector.
- [ver] - Through the [ver] you can display the software version of the device.
BB5PIX
13