Copying Data Into The Machine Memory - Pfaff 3108-1/1306 Instruction Manual

11

Copying data into the machine memory

.05.05
● Call up the program management, see Chapter 11.05.01 Calling up the program
management.
● Press the left +/- keys until the corresponding menu item appears.
● Confi rm the selection of the menu item with the "Enter" function by pressing the right
plus key.
● Press the corresponding +/- keys to select the data to be copied from the
SD-memory card into the machine memory:
● The copying process is started with the "Enter" function by pressing the right plus key.
● When the left +/- keys are pressed, the other menu items of the program management
are called up.
COPY
COPY 01
MD = machine parameters
0 - 99 = programs
ALL = all programs
If the data for copying already exists, a safety enquiry appears before overwri-
ting the data. Press the right plus key to confi rm the copying process. The co-
pying process can be stopped by pressing the right minus key.
02
Input
47