Table of Contents
Advertisement
● With the machine switched off insert the SD-card into the control panel.
To update the machine software carry out the following steps:
While the machine software is being updated, no setting up, maintenance or
adjustment work may be carried out on the machine!
1
Fig. 13 - 46
More information and assistance is at your disposal in the fi le "PFPHILFE.TXT",
which can be called up from the PFP boot program by pressing the "help"
button.
● Switch on the machine, keeping the boot
key 1 pressed.
● Press the "TE" key.
The software update is carried out. Duri-
ng the updating process the diode in the
memory card slot fl ashes.
● During the updating process the machine
must not be switched off.
● When the update has been completed,
switch off the machine and remove the
SD-card.
● Switch on the machine
● A plausibility control is carried out and, if
necessary, a cold start.
Adjustment
81
Advertisement
Table of Contents
