Table of Contents
Advertisement
● Turn the handwheel to check whether adjustment pin 1 can be inserted into the
adjustment hole on gauge 3.
● Where required, adjust the position of the clamp by changing the SM1 + SM2
accordingly.
● Release screw 2 and remove adjustment pin 1.
● Unscrew setting gauge 3.
● Finish input by pressing the button TE.
8
Adjusting the potentiometer for speed reduction
.06
NO
209
● Switch machine on.
● Set lowest lift "0" on the setting wheel.
● Call up parameter "209" and press button "D+" to store the lower value.
● Set highest lift "9" on the setting wheel.
● Call up parameter "210" and press button "D+" to store the upper value.
Mounting and commissioning the machine
NO
SM1
608
0
MIN
314
285
SM2
0
NO
210
314
MAX
373
23
Advertisement
Table of Contents
