Copying Programs And Machine Data In The Machine Memory - Pfaff 1571 Instruction Manual

11

Copying programs and machine data in the machine memory

.06.05
 To call up program management, see chapter 11.06.01 Calling up program
management.
COPY
 Press the left +/- keys until the corresponding menu item is displayed.
 Confi rm selection of the menu item by pressing the right plus key.
 Select the data to be copied from the SD memory card to the machine memory
(programs 01 - 99, all programs - ALL) by pressing the +/- keys under the symbol of the
memory card.
 Select the data for storing in the machine memory by pressing the +/- keys under the
symbol of the memory card.
 Confi rm the copying process by pressing the right plus key.
 Further program management menu items are called up by pressing the left +/- keys.
P
«
«
P
COPY ALL
ALL
If a program is already present in the machine memory, a prompt for
confi rmation will be displayed. The program will be overwritten by pressing the
right plus key. Pressing the right minus key will cancel the operation.
Input
75