Copying Single Programs And Machine Data In The Machine Memory - Pfaff 3511-3/01 Instruction Manual

Input
11

Copying single programs and machine data in the machine memory

.01.06
O To call up program management, see chapter 11.01.01 Calling up program
O Press the left +/- keys until the corresponding menu item is displayed.
O Confirm selection of the menu item by pressing the right plus key.
O Select the data to be copied from the SD memory card to the machine memory (pro-
O When copying programs, select the program number for saving on the machine memory
O Confirm the copying process by pressing the right plus key.
O Further menu items of program management are called up by pressing the left +/- keys.
52
management.
«
COPY
«
1 2
COPY
grams 01 - 99) by pressing the +/- keys under the symbol of the memory card.
by pressing the +/- keys under the symbol of the memory card.
If a program is already present in the machine memory, a prompt for confir-
mation will be displayed. The program will be overwritten by pressing the right
plus key. Pressing the right minus key will cancel the operation.