Preliminary Adjustment Of The Needle Height - Pfaff 3108-1/1306 Instruction Manual

Adjustment
13

Preliminary adjustment of the needle height

.05.02
● Unscrew clamp 1, plate 2 and hopping foot 3.
● Without turning it, re-position needle bar 4 (screw 5) in accordance with the
58
Requirement
When the needle bar is positioned at t.d.c. (balance wheel position 0°), the clearance
between the needle point and the cover plate 6 should be 27 mm.
5
4
1
2
Fig. 13- 02
requirement.
3
27 mm
6