Copying Programs To The Machine Memory - Pfaff 3307-3 Series Instruction Manual

Input
11

Copying programs to the machine memory

.04.05
●
●
●
●
●
●
●
60
Call up the program management and select the desired button type, see Chapter
11.04.01 Calling up the program management.
COP Y
Press the left +/- keys until the corresponding menu item appears.
Confi rm the selection of the menu item by pressing the right plus key.
COP Y A L L A L L
Press the +/- keys under the memory card symbol to select the seam patterns which are
to be copied from the SD-memory card to the machine memory (programs 1 – 99).
Select the program numbers to be stored in the machine memory by pressing the
+/- keys under the machine memory symbol.
Confi rm the copying process by pressing the right plus key.
Press the left +/- keys to select the other menu items of the program management.
If the entire contents of the memory card "ALL" are selected, all the seam pat-
terns for the selected button type will be copied to the machine memory.
If a seam pattern already exists in the machine memory, a confi rmation enquiry
is displayed. If the right plus key is pressed, the seam pattern will be overwrit-
ten. If the right minus key or the "basic position" key are pressed, the process
is stopped.