Control Cam To Roller Lever Clearance (Resting Position) - Pfaff 3108-1/1306 Instruction Manual

Adjustment
13 Control cam to roller lever clearance
.05.13 (resting position)
Requirement
When the thread trimmer is in its resting position (balance wheel position 270°) there
should be a clearance of 0.1 mm between the roller lever 5 and the outside edge of con-
trol cam 1.
2
4
5
3
1
0,1 mm
Fig. 13 - 13
● Adjust control cam 1 (screw 2) together with retaining collar 3 (screw 4) in accordance
with the requirement.
69