Winding The Bobbin Thread, Regulating The Winder Tension - Pfaff 3108-1/1306 Instruction Manual

9

Winding the bobbin thread, regulating the winder tension

.02
Fig. 9 -02
● Draw the thread from the reel stand through guide hole 1 into the bobbin winder tension
unit 2 and then behind the thread clamp 3.
● Cut off the thread in thread clamp 3. The thread is retained.
● Place empty bobbin 4 on the bobbin winder spindle 5.
● To switch on the bobbin winder, push up lever 6.
● The bobbin winder stops automatically, when the bobbin 4 is fi lled suffi ciently.
● Remove full bobbin 4 and cut off the thread in thread clamp 3.
● The tension of the thread on bobbin 4 can be adjusted on the bobbin winder tension unit
2.
● The volume of thread on bobbin 4 can be adjusted with screw 7.
● If separate winding is required, proceed as follows:
● Call up bobbin winding function.
● Start the winding function using the treadle or the sewing start button.
4
3
6
7
The bobbin is wound during sewing.
2
5
Setting up
1
25