Table of Contents
Advertisement
12
Care and maintenance
12
Servicing and maintenance intervals
.01
Clean the entire machine ..................................................................................once a week
Clean the hook compartment ...............................Daily, several times if in continuous use
Check the oil level ........................................................... Daily, before starting the machine
Check/adjust the air pressure ......................................... Daily, before starting the machine
Clean the fi lter of the air fi lter/lubricator ........................................................... As required
12
Cleaning the machine
.02
The cleaning cycle required for the machine depends on following factors:
● Single or several shift operation
● Amount of dust resulting from the workpiece
It is therefore only possible to stipulate the best possible cleaning instructions for each
individual case.
To avoid breakdowns, the following cleaning work is recommended for single shift operation:
● Clean hook compartment and needle area of sewing head several times daily.
● Clean the entire machine at least once a week.
To do so:
● Switch on the machine.
● Call up the threading aid function. Sewing start is disengaged.
● Clean the machine.
● Move the machine to its basic position.
These maintenance intervals are calculated for the average running time of a
single shift operation. If the machine is operated more than this, shorter inter-
vals are recommended.
Care and maintenance
51
Advertisement
Table of Contents
