Copying Data Into The Machine Memory - Pfaff 3371-1 series Instruction Manual

Input
11

Copying data into the machine memory

.06.05
●
●
●
●
●
●
50
Call up the program management, see Chapter 11.06.01 Calling up the program
management.
COPY
Press the left +/- keys until the corresponding menu item appears.
Confi rm the selection of the menu item with the "Enter" function by pressing the right
plus key.
COPY
Press the corresponding +/- keys to select the data to be copied from the
SD-memory card into the machine memory:
MD =
50 - 99 =
ALL =
The copying process is started with the "Enter" function by pressing the right plus key.
If the data for copying already exists, a safety enquiry appears before overwri-
ting the data. Press the right plus key to confi rm the copying process. The co-
pying process can be stopped by pressing the right minus key.
When the left +/- keys are pressed, the other menu items of the program management
are called up.
01 02
machine parameters
programs
all programs