Table of Contents
Advertisement
9
Shifting the seam pattern
.10
To adapt the seam patterns to formed workpiece holders, selected seam patterns can be
shifted.
● From the basic position of the machine select the desired program station, e.g. P1.
● Tact through the seam pattern, e.g. forwards.
The actual coordinates are shown together with the shift values for each stitch.
● With the corresponding +/- keys it is possible to enter a shift value for the entire seam
pattern in X- or Y-direction at each seam pattern coordinate.
X:
-300 -
+0
-200
The seam pattern shift is allocated to the respective actual program station and
is deleted when the program number is changed.
Y:
+0
Setting up
33
Advertisement
Table of Contents
