Mounting and commissioning the machine
8
Mounting the spool holder
.02
8
Commissioning
.03
● Before commissioning the machine, clean it thoroughly and lubricate it, or pour in oil,
● The machine, in particular the electric wires and pneumatic connection tubes, must be
● Have skilled personnel check if the machine can be operated with the available mains
● Connect machine to the compressed air system.
20
Fig. 8 - 02
see Chapter 12 Care and Maintenance!
examined for any damage.
voltage.
Do not operate the machine if there is any discrepancy.
The machine may only be connected to an earthed socket!
The manometer on the air fi lter/lubricator unit must display a pressure of 6 bar.
If necessary, set to the correct value (see chapter 12.05 Checking / regulating air
compression).
● Mount the spool holder according to
Fig. 8.02.