Copying Data Into The Machine Memory - Pfaff 3371-10 series Instruction Manual

11

Copying data into the machine memory

.07 .05
Call up the program management, see Chapter 11.07.01 Calling up the program
●
management.
Press the left +/- keys until the corresponding menu item appears.
●
Confirm the selection of the menu item with the "Enter" function by pressing the right
●
plus key.
Press the corresponding +/- keys to select the data to be copied from the
●
SD-memory card into the machine memory:
The copying process is started with the "Enter" function by pressing the right plus key.
●
When the left +/- keys are pressed, the other menu items of the program management
●
are called up.
COPY
COPY 01 02
MD = machine parameters
50 - 99 = programs
= all programs
ALL
If the data for copying already exists, a safety enquiry appears before overwri-
ting the data. Press the right plus key to confirm the copying process. The co-
pying process can be stopped by pressing the right minus key.
Input
53