Function Key Mapping - Newland NLS-HR32-BT User Manual

Function Key Mapping

When Ctrl+ASCII Mode is selected, function characters (0x00 - 0x1F) are sent as ASCII sequences.
** Disable
Alt+Keypad Mode
If Ctrl+ASCII Mode is selected and other parameters of USB HID Keyboard adopt factory defaults,
barcode data "A<HT>(i.e. Horizontal Tab)F" (0x41/0x09/0x46) is sent as below:
"A" - Keystroke "A".
<HT> - "Ctrl Make" + Keystroke "I" + "Ctrl Break"
"F" - Keystroke "F"
For some text editors, "Ctrl I" means italic convert. So the output may be "AF".
If Alt+Keypad Mode is selected and other parameters of USB HID Keyboard adopt factory defaults, the
data above is sent as below:
"A" - Keystroke "A".
<HT> - "Alt Make" + Keystrokes "009" + "Alt Break"
"F" - Keystroke "F"
73
Enter Setup
Ctrl+ASCII Mode
** Exit Setup