Tiller Arm Reassembly - Mercury 45 Jet 50-55 Service Manual

12. Drive out drift pin and remove throttle gear from throttle
arm.
a - Gear
b - Drift Pin

Tiller Arm Reassembly

1. Reinstall throttle gear on throttle arm and secure gear
to arm with new drift pin.
a - Gear
b - Drift Pin
2. Apply a light coat of Special Lubricant 101 to gear teeth
and inside of gear cover.
7B-14 - OUTBOARD INSTALLATION/ATTACHMENTS
b
a
51602
b
a
51602
3. Slide cover and friction device onto throttle arm.
d
b
a - Throttle Arm
b - Gear
c - Throttle Friction Device
d - Cover
4. Install throttle arm assembly into tiller arm.
5. Torque friction device attaching bolt to 40 lb. in. (4.5
N·m)
a
a - Bolt [Torque to 40 lb. in. (4.5 N.m)]
c
a
51604
51604
90-817643R1 DECEMBER 1996