Reservoir Assembly Removal - Mercury 45 Jet 50-55 Service Manual

2. Remove O-ring from end frame.
3. Place scribe mark on motor housing and end
frame as reassembly reference, as shown.
a
b
a - O-ring
b - Scribe Mark
4. Remove end frame and armature from housing.
a
b
a - End Frame
b - Washer
c - Armature
d - Fiber Guard (Brush Wires)
e - Housing
5B-26 - MID-SECTION
51194
e
d
c
51194

Reservoir Assembly Removal

CAUTION
DO NOT ADJUST OR REMOVE REVERSE
THRUST VALVE. THIS VALVE IS PRESET AT FAC-
TORY FOR PRECISE REVERSE THRUST PRES-
SURE AND DOES NOT REQUIRE ADJUSTMENT.
1. Remove manual release valve from manifold. DO
NOT remove or adjust reverse thrust valve.
b
a - Manual Release Valve
b - Manifold
c - Reverse Thrust Valve
2. Remove "E" clip and O-rings from manual release
valve.
a
c
a - "E" Clip
b - O-rings
c - Manual Release Valve
c
a
51194
b
51196
90-817643R1 DECEMBER 1996