Power Trim System Removal - Mercury 45 Jet 50-55 Service Manual

Power Trim System Removal

Support outboard with tilt lock lever when servicing
power trim system.
1. Disconnect power trim harness form outboard
wiring harness.
2. Remove screw and clip securing wiring harness
to clamp bracket.
3. Use suitable tool to remove (DRIVE DOWN) up-
per dowel pin. Retain pin.
a - Dowel Pin
4. Use suitable punch to drive out upper pivot pin.
a
a - Pivot Pin
90-817643R1 DECEMBER 1996
a
51144
51144
5. Use suitable punch to remove (DRIVE UP) lower
dowel pin. Retain dowel pin.
a
a - Dowel Pin
6. Use suitable punch to drive out lower pivot pin.
a
a - Pivot Pin
51144
51144
MID-SECTION - 5C-21