Mercury 45 Jet 50-55 Service Manual page 514

Outboard Mounting Hardware
e
a - Mounting Bolts (4)
b - Flat Washers (4)
c - Locknuts (4)
d - Transom Clamp Retainers With Mounting Hardware
e - Shims - Transom Clamp Retainers (If Required)
Fasten outboard to boat transom following installation A or
B shown below.
Installation A
Use for permanent installation.
a - Tighten Transom Clamp Handles
b - Mounting Bolts (Supplied with Outboard
90-817643R1 DECEMBER 1996
Use for easy removal and installation of outboard.
a
b
c
d
51509
a - Tighten Transom Clamp Handels
b - Part Number 812433-C1
c - Part Number 812432-C1
d - Transom Clamp Retainers (Opitional)
Fastening outboard for permanent installation.
Drill four 1/2 in. (12.5mm) holes and fasten outboard to
boat transom.
a
b
51462
a - Bolts (4)
b - Flat Washers (4)
c - Locknuts (4)
d - Marine Sealer
Installation B
b
d
Installation A
c
b
d
OUTBOARD INSTALLATION/ATTACHMENTS - 7A-3
a
c
51462
a
51489