Removing The Read Unit; Removing The Power Supply Shield Plate; Removing The Fixing Film Unit - Canon FAX-L380S Series Service Manual

[3] [1]
[2]
F-3-400
2) Remove the four connectors [1] and the flat cable [2].
3) Remove the five screws [3] and the SCNT unit [4].
[4] [3]
[3]
F-3-401

3.6.2.10 Removing the Read Unit

/ / FAX-L390 / / / FAX-L380S
1) Take the flat cable [1] off the cable guide.
2) Remove the screw [2] and remove the switch cover [3].
[1]
F-3-402
3) Remove the connector [1] of the DCNT board.
4) Remove the two screws [2], and detach the read unit [4] upward while
releasing the two claws [3].
[2]
[1] [3]
[3]
[2]
[1]
F-3-403

3.6.2.11 Removing the Power Supply Shield Plate

/ / FAX-L390 / / / FAX-L380S
1) Remove the five screws [1] to remove the power supply shield plate [2].
[1]
F-3-404
0011-4852

3.6.2.12 Removing the Fixing Film Unit

/ / FAX-L390 / / / FAX-L380S
1) Remove the two screws [1] and remove the Fixing cover [2].
[1]
[2]
F-3-405
2) Remove the two screws [1]. Remove the Fixing entrance guide [2] by
sliding it sideways back and forth.
[2]
[3] [4]
[2]
[1]
Chapter 3
0011-4853
0011-4854
3-57