Removing The Rear Cover; Removing The Scnt Unit; Removing The Power Supply Shield Plate; Removing The Power Supply Assembly - Canon FAX-L380S Series Service Manual

[1]

3.1.9.7 Removing the Rear Cover

/ / FAX-L380S
1) Opening the face-up cover [1], and then lower the fixing pressure release
levers [2] on both sides and release the pressure.
2) Remove four screws [3].
3) Remove the rear cover [4] as you pull it toward you.
[3]
[1]
3.1.9.8 Removing the Rear Cover
/ / FAX-L390
1) Opening the face-up cover [1], and then lower the fixing pressure release
levers [2] on both sides and release the pressure.
2) Remove four screws [3].
3) Remove the rear cover [4] as you pull it toward you.
[3]
[1]

3.1.9.9 Removing the SCNT Unit

/ / FAX-L390 / / / FAX-L380S
1) Remove the flat cable [1] on the SCNT board. As you disengage the claw
[2], remove the motor cover [3].
[1]
[2]
F-3-88
[2]
[3]
[4]
F-3-89
[2]
[3]
[4]
F-3-90
[3]
[2]
F-3-91
2) Remove the four connectors [1] and the flat cable [2].
3) Remove the five screws [3] and the SCNT unit [4].
0011-4739
[4]
[3]
F-3-92

3.1.9.10 Removing the Power Supply Shield Plate

/ / FAX-L390 / / / FAX-L380S
0011-6246 1) Remove the five screws [1] to remove the power supply shield plate [2].
[1]
F-3-93

3.1.9.11 Removing the Power Supply Assembly

/ / FAX-L390 / / / FAX-L380S
1) Remove the three screws [1].
2) Remove the six connectors [2] as well as the flat cable [3] on the DCNT
board.
0011-6248
[1]
[3]
[2]
[1] [3]
[2]
[1]
Chapter 3
0011-4741
0011-4742
3-13