Canon FAX-L380S Series Service Manual page 136

Chapter 5
#3 NUMERIC Param.
(Numeric parameter settings)
Default
001: 0
002: 10 (10 %)
003: 15 (15 times)
004: 12 (12 lines)
005: 4 (4 sec)
006: 1 (1 sec)
007: 0
008: 0
009: 6 (6 digits)
010: 5500 (55 sec)
011: 3500 (35 sec)
012: 0
013: 1300 (13 sec)
014: 0
015: 120 (1200 ms)
016: 2 (2 sec)
017: 100 (1000 ms)
018: 0 (0 ms)
019: 400 (4000 ms)
020: 100 (1000 ms)
021: 0 (0 ms)
022: 400 (4000 ms)
023: 0
024: 10
025: 60 (60 ms)
026: 0
027: 0
028: 3 (3 sec)
Item 029 to 080:
080:
F-5-4
Memo
The relationship between the setting values and actual detection levels (used as rough standards) of the parameters of #3 NUMERIC Param. is given below.
5-6
Range
Not used
(1-99) RTN signal transmission condition (1)
(2-99) RTN signal transmission condition (2)
(1-99) RTN signal transmission condition (3)
(0-60) Pause time for NCC (before the ID code)
(0-60) Pause time for NCC (after the ID code)
Not used
Not used
(0-20) The number of digits in telephone compared
against TSI signal to be matched
(0-9999) T0 timer
(0-9999) T1 timer (Rx)
Not used
(500-3000) Maximum time allowed to receive one line
of image data
Not used
(0-999) Hooking detection time
(0-9) Pseudo RBT transmission from CML on time until start
(0-999) Pseudo RBT signal pattern: On time
(0-999) Pseudo RBT signal pattern: Off time (short)
(0-999) Pseudo RBT signal pattern: Off time (long)
(0-999) Pseudo CI signal pattern: On time
(0-999) Pseudo CI signal pattern: Off time (short)
(0-999) Pseudo CI signal pattern: Off time (long)
(0-9) FAX/TEL switching function signal detection level
(0-20) Pseudo RBT signal transmission level
(0-999) Answering machine connection function signal
detection time
Not used
Not used
(1-60) Menu pop-up time
Not used
Parameter 023
0: -37.0 dBm 1: -38.0 dBm
4: -41.0 dBm 5: -42.0 dBm
8: -45.0 dBm 9: -46.0 dBm
Parameter 024
10 to 15: -10 to -15 dBm
T-5-3
2: -39.0 dBm 3: -40.0 dBm
6: -43.0 dBm 7: -44.0 dBm
T-5-4
16 to 20: -15 dBm (Fixed)