Menu Switch Settings (Menu); Menu; Numeric Parameter Settings (Numeric Param.); Numeric Param - Canon FAX-L380S Series Service Manual

Bit
2
3
4
5
6
7
5.5.3.8.2 Details of Bit 0
/ / FAX-L390 / / / FAX-L380S
Select whether to use the V.8 protocol when calling. If No is selected, the V.8 protocol is inhibited at calling and the V.21 protocol is used.
5.5.3.8.3 Details of Bit 1
/ / FAX-L390 / / / FAX-L380S
Select whether to use the V.8 protocol when called. If No is selected, the V.8 protocol is inhibited when called and the V.21 protocol is used.
5.5.3.8.4 Details of Bit 2
/ / FAX-L390 / / / FAX-L380S
If ANSam signal is not received during transmission (mainly manual transmission), select whether to use the V.8 protocol when the other fax machine declares the
V.8 protocol in DIS signal.
If "Yes" is selected, CI signal is transmitted to DIS signal of the other party, and the V.8 protocol is performed.
If "No" is selected, CI signal is not transmitted to DIS signal of the other party, and V.21 protocol is performed.
5.5.3.8.5 Details of Bit 3
/ / FAX-L390 / / / FAX-L380S
If the calling party cannot recognize ANSam signal when a call is received, select whether to declare the use of the V.8 protocol for the following transmitted DIS
signal.
If "Yes" is selected, the machine declares the use of the V.8 protocol in DIS signal, and performs the V.8 protocol after the calling party transmits CI signal.
If "No" is selected, the machine does not declare the use of the V.8 protocol in DIS signal, and perform the V.21 protocol.
5.5.3.8.6 Details of Bit 4
/ / FAX-L390 / / / FAX-L380S
Select whether the receiver falls back during V.34 reception.
If "Prohibit" is selected, the receiver does not fall back.
5.5.3.8.7 Details of Bit 5
/ / FAX-L390 / / / FAX-L380S
Select whether the transmitter falls back during V.34 transmission.
If "Prohibit" is selected, the transmitter does not fall back.

5.5.4 Menu Switch Settings (MENU)

5.5.4.1 #2 MENU

/ / FAX-L390 / / / FAX-L380S
No.
008
009
No.008
Use it to to set an upper limit to the mojulation speed (baud rate) for the V.34 primary channel.
No.009
Use it to to set an upper limit to the data transmission speed for the V.34 primary channel between 2.4k and 33.6k bps in increments of 2.4kbps.

5.5.5 Numeric Parameter Settings (NUMERIC Param.)

5.5.5.1 #3 NUMERIC Param.

/ / FAX-L390 / / / FAX-L380S
Function
Caller V.8 protocol late atart
Called party V.8 protocol late start
V.34 reception fallback
V.34 transmission fallback
Not used
Not used
Function
V.34 modulation speed upper limit
V.34 data speed upper limit
1
No
No
Prohibited
Prohibited
-
-
T-5-20
Selection range
2400 - 3429 (baud)
2.4 - 33.6 (kbps)
0
Yes*
Yes*
Not prohibited*
Not prohibited*
-
-
Default
setting
3429
33.6
Chapter 5
0011-6891
0011-6892
0011-6894
0011-6895
0011-6897
0011-6899
0011-6901
0011-6903
5-21