Removing The Rear Cover; Removing The Scnt Unit; Removing The Power Supply Shield Plate; Removing The Power Supply Assembly - Canon FAX-L380S Series Service Manual

Chapter 3
levers [2] on both sides and release the pressure.
2) Remove four screws [3].
3) Remove the rear cover [4] as you pull it toward you.
[3]
[1]

3.5.2.8 Removing the Rear Cover

/ / FAX-L390
1) Opening the face-up cover [1], and then lower the fixing pressure release
levers [2] on both sides and release the pressure.
2) Remove four screws [3].
3) Remove the rear cover [4] as you pull it toward you.
[3]
[1]

3.5.2.9 Removing the SCNT Unit

/ / FAX-L390 / / / FAX-L380S
1) Remove the flat cable [1] on the SCNT board. As you disengage the claw
[2], remove the motor cover [3].
[3] [1]
[2]
F-3-267
2) Remove the four connectors [1] and the flat cable [2].
3) Remove the five screws [3] and the SCNT unit [4].
3-38
[2]
[3]
[4]
F-3-265
[2]
[3]
[4]
F-3-266
[4]
[3]
F-3-268

3.5.2.10 Removing the Power Supply Shield Plate

0011-6336
/ / FAX-L390 / / / FAX-L380S
1) Remove the five screws [1] to remove the power supply shield plate [2].
[1]
F-3-269

3.5.2.11 Removing the Power Supply Assembly

/ / FAX-L390 / / / FAX-L380S
1) Remove the three screws [1].
2) Remove the six connectors [2] as well as the flat cable [3] on the DCNT
board.
0011-6337
[1] [2]
F-3-270
3) As you remove the bosses on both sides [1], lower the front part of the
power supply assembly [2]. Then pull it to remove the power supply
assembly.
[3]
[2]
[1] [3]
[2]
[1]
[3]
[2]
[1]
0011-4801
0011-4803