Removing The Cassette Pickup Solenoid; Cassette Separation Pad; Removing The Cassette; Removing The Rear Of The Cassette - Canon FAX-L380S Series Service Manual

[2]
[1]
F-3-271

3.5.2.12 Removing the Cassette Pickup Solenoid

/ / FAX-L390 / / / FAX-L380S
1) Place the main unit down on its front face (so that the interior of the main
unit is easily visible).
2) Remove the connector [1] on the DCNT board and take out the cable from
the cable guide.
3) Remove the screw [2] to remove the cassette pickup solenoid [3], which
is located behind the main motor.
[3]
[2]
F-3-272

3.5.3 Cassette Separation Pad

3.5.3.1 Removing the Cassette

/ / FAX-L390 / / / FAX-L380S
1) Remove the cassette by holding the cassette handle.

3.5.3.2 Removing the Rear of the Cassette

/ / FAX-L380S
1) Lift the rear of the cassette, and separate the rear from the front.

3.5.3.3 Removing the Cassette Separation Pad

/ / FAX-L380S
1) Remove the shafts [1] on both sides of the lifting plate. Remove the lifting
plate [3] while watching the lifting plate spring [2] carefully.
[3]
[2]
[1]
F-3-273
2) Remove the two claws [1] on both sides of the cassette separation pad and
lift it up while watching the lifting plate spring [2] carefully. Ensure that
the separation pad spring does not get lost.
3) Remove both the plate and the cassette separation pad [3] by sliding them
to the left.
[1]
[2]
[1]
F-3-274
0011-4802
4) Remove the two claws [1] and remove the cassette separation pad [2] by
sliding it up.
[1]
F-3-275

3.5.3.4 Removing the Cassette Separation Pad

/ / FAX-L390
1) As you disengage the three claws [1], remove the cassette front cover [2].
0011-4804
0011-4805
0011-4806
[2] [1]
F-3-276
2) Remove the two claws [1] on both sides of the cassette separation pad.
F-3-277
3) Remove the two claws [2] while pushing down the lifting plate [1].
Remove the cassette separation pad [3] by sliding it up. Ensure that the
separation pad spring does not get lost.
[3]
[2]
[1]
Chapter 3
0011-6338
3-39