Removing The Rear Cover; Removing The Scnt Unit; Removing The Read Unit - Canon FAX-L380S Series Service Manual

[1]

3.6.1.7 Removing the Rear Cover

/ / FAX-L380S
1) Opening the face-up cover [1], and then lower the fixing pressure release
levers [2] on both sides and release the pressure.
2) Remove four screws [3].
3) Remove the rear cover [4] as you pull it toward you.
[3]
[1]

3.6.1.8 Removing the Rear Cover

/ / FAX-L390
1) Opening the face-up cover [1], and then lower the fixing pressure release
levers [2] on both sides and release the pressure.
2) Remove four screws [3].
3) Remove the rear cover [4] as you pull it toward you.
[3]
[1]

3.6.1.9 Removing the SCNT Unit

/ / FAX-L390 / / / FAX-L380S
1) Remove the flat cable [1] on the SCNT board. As you disengage the claw
[2], remove the motor cover [3].
[1]
[2]
F-3-373
[2]
[3]
[4]
F-3-374
[2]
[3]
[4]
F-3-375
[3]
[2]
F-3-376
2) Remove the four connectors [1] and the flat cable [2].
3) Remove the five screws [3] and the SCNT unit [4].
0011-4842
[4]
[3]
F-3-377

3.6.1.10 Removing the Read Unit

/ / FAX-L390 / / / FAX-L380S
0011-6361 1) Take the flat cable [1] off the cable guide.
2) Remove the screw [2] and remove the switch cover [3].
F-3-378
3) Remove the connector [1] of the DCNT board.
4) Remove the two screws [2], and detach the read unit [4] upward while
releasing the two claws [3].
0011-6362
[1]
[3]
[2]
[1] [3]
[3]
[2]
[1]
Chapter 3
0011-4844
3-53