Removing The Power Supply Assembly; Removing The Manual Pickup Solenoid; Main Motor; Removing The Cassette - Canon FAX-L380S Series Service Manual

[2]
[1]
[1]
F-3-328

3.5.5.13 Removing the Power Supply Assembly

/ / FAX-L390 / / / FAX-L380S
1) Remove the three screws [1].
2) Remove the six connectors [2] as well as the flat cable [3] on the DCNT
board.
[1] [2] [2]
F-3-329
3) As you remove the bosses on both sides [1], lower the front part of the
power supply assembly [2]. Then pull it to remove the power supply
assembly.
[2]
[1]
F-3-330

3.5.5.14 Removing the Manual Pickup Solenoid

/ / FAX-L390 / / / FAX-L380S
1) Place the main unit down on its front face (so that the interior of the main
unit is easily visible).
2) Remove the cable [1] from the cable guide.
3) Remove the screw [2] to remove the manual pickup solenoid [3].
[1]
[3]
[2]
F-3-331
[3]
[1]

3.5.6 Main Motor

3.5.6.1 Removing the Cassette

/ / FAX-L390 / / / FAX-L380S
1) Remove the cassette by holding the cassette handle.

3.5.6.2 Removing the Right Cover

/ / FAX-L380S
1) Open the front cover [1], and remove the two screws [2] on the front side.
0011-4828
2) Remove the two screws [1] on the back side.
[1]
3) Open the operation panel. As you disengage the claw [1], remove the right
cover [2].
0011-4829

3.5.6.3 Removing the Right Cover

/ / FAX-L390
1) Open the front cover [1], and remove the two screws [2] on the front side.
Chapter 3
[2]
[1]
F-3-332
F-3-333
[1]
[2]
F-3-334
0011-4830
0011-4831
0011-6349
3-47