Icons And Symbols - Centsys Lattice Installation Manual

Summary of Icons and Symbols used in Programming Menu Structures
WAIT
Present & Remove Admin Tag
This icon symbolises that the "Admin" tag is presented and removed
immediately (i.e. "Swiped" past the reader)
Present & Hold Admin Tag
This icon symbolises that the "Admin" tag is presented and held for
5 seconds
Present & Remove New Tag
This icon symbolises that an unlearned/new tag is presented and removed
immediately (i.e.swipe new tag past the reader)
Present & Hold New Tag
This icon symbolises that an unlearned/new tag is presented and held for
5 seconds
Present & Remove Existing Tag
This icon symbolises that an existing user tag is presented and removed
(i.e. "Swiped" past the reader)
Present & Hold Existing Tag
This icon symbolises that an existing user tag is presented and held for
5 seconds
Wait
This icon symbolises that you should wait for a few seconds before
progressing to the next level
Incrementation with the Admin Tag
This icon symbolises that the "Admin" tag is used to scroll the ID reference
number numerically up or down one digit at a time by presenting and
removing the "Admin" tag.The numbers scroll up when the green LED is ON
and scroll down when the red LED is ON. If the tag is presented and held
then the scrolling rate increases.
Programming Status Change
This icon symbolises that some programming status changes each time the
"Admin" tag is presented and removed. The change is identified by the
change in status of the red and green LED's on the L1000 front panel.

Icons and Symbols

Icons and Symbols
Page 65